The work included, but was not limited to, construction of Airport Traffic Control Tower (ATCT) with 180-foot tower shaft and steel frame glass enclosed cab; 12,000 square foot Base Building and 1,500 square foot Environmental Support Unit (ESU) Building. There were intricate constructed case-work and formed in place walls for the tower. The base building is built on spread footings with cast in place stem walls. The skin of all three structures is precast concrete.
The control tower includes systems to control all runway, taxiway, and approach lighting of the airport. Carmon Construction, Inc. completed wireways and ductbanks that house radar systems and telecommunication systems.
Carmon Construction, Inc. also installed an elevator for personnel transport to the tower cab.
New cab consoles were installed in the cab, as well as new access flooring. A glass enclose link was constructed to connect the control tower with the base building. The 12,600 square foot base building was constructed of precast concrete and CMU block. The base building is the main administrative building. Federal Aviation Administration personnel handle the approach aircraft. Access floor was installed in all the communication areas. This provides a space to interconnect voice and data cabling between the base building and the air traffic control cab.
The Environmental Support Unit(ESU), which encompassed approximately 1,500 square feet was constructed of precast concrete panels. The ESU building was the mechanical support for electrical generators, UPS battery backup and electrical services.
A 90 space asphalt parking lot with security gates and fencing was constructed. Landscape irrigation was installed to all islands in the parking lot as well as around the base building and control tower. Trees and shrubbery were installed around the entire perimeter of the facility.
Federal Aviation Administration
21,748 sq ft
Completion date: October 2007
Complete project listing available upon request.